Wireless Bridges
A dish link for the long haul: an integrated 25 dBi directional antenna in a 7.5° beam, IP67 housing and the only bridge in our range that runs on standard 802.3af PoE. Building-to-building backhaul, CCTV links, farms and remote sites — no trenching.
Supply under your own brand, from 1 unit. Printed label samples the same day. See OEM & private label options →
Overview
A wireless bridge solves one problem: moving Ethernet where you cannot run cable. The WB5acDish-Pro is aimed at the far end of that scale — an integrated 25 dBi dish that concentrates the signal into a 7.5° beam, so a pair lines up with a compass and a signal meter and then holds a stable 867 Mbps link over tens of kilometres.
Standard 802.3af PoE. Seven of the eight bridges we make use non-standard passive PoE and need their own injector. This one does not — plug it into a compliant PoE switch and it powers up, which makes it the safe default for integrators who standardise on managed PoE infrastructure.
IP67 die-cast housing, −30 to +55 °C, pole mount hardware in the box. The 7.5° beam is tight enough for long links and forgiving enough to align without specialist tooling.
Runs as a transparent Layer 2 bridge with VLAN pass-through, managed over the web interface. Configure once, then leave it alone for years.
This is an OEM platform. Your brand on the housing, your packaging, your firmware defaults — starting from a single unit so you can pilot before you commit.
Specifications
Three groups, same order on every bridge page: radio and link first, power and protection second, mechanical and environmental third.
Need a parameter that is not listed here — gain patterns, wind loading, packaging data? Email us for the datasheet, or ask us for the document set for this model.
Detailed specifications
The complete parameter set for this model. Data below is maintained by our engineering team — if a figure is critical to your design, ask us to confirm it in writing before you commit.
Certification note. We hold no radio type approval for this line. Wireless access points and bridges are supplied for OEM and white-label programmes, and in those programmes the company whose name goes on the product — the brand owner — is responsible for type approval in each destination market. Tell us where you are selling and we will say in writing which documents we can hand over with the hardware and which ones you will need to obtain yourself.
Power & PoE
Most outdoor bridges in this price class — including most of our own range — run on non-standard passive PoE, which means they must be fed by their own injector and will be damaged if you plug them into a normal PoE switch. This model is different.
If you are standardising a site on managed PoE switches, this model removes an entire class of installation mistake. For a mixed fleet, order the injector with every non-standard unit — we ship it in the carton.
Family & ordering
Range is the first decision, then PoE type, then port speed. The table below is the whole outdoor bridge range — pick the distance you actually need, and check the power box before you commit.
| Model | Range | Speed | Antenna | PoE |
|---|---|---|---|---|
B401Mini, 2.4 GHz |
≤ 1 km | 300 Mbps | Integrated | 24 V passive |
N540Point-to-multipoint 1-to-8 |
2 km | 450 Mbps | 14 dBi integrated | 24 V passive |
N620Point-to-multipoint 1-to-8 |
2 km | 900 Mbps | 14 dBi integrated | 24 V passive |
5nL3TDMA |
5 km | 300 Mbps | Integrated | 24 V passive |
WB5G03IP67 |
5 km | 867 Mbps | Integrated | 12 V passive |
WB5acL3-ExIP67, TDMA |
5 km | 867 Mbps | Integrated | 24 V passive |
WB5acL8-ExIP67, TDMA |
13 km | 867 Mbps | Integrated | 24 V passive |
WB5acDish-ProThis page · 25 dBi dish |
30 km | 867 Mbps | 25 dBi dish, 7.5° | 802.3af standard |
Quote the full model name and tell us the distance and the power you have on site —
for example WB5acDish-Pro, 20 km, standard PoE switch. We will confirm
availability, lead time and pricing, and flag anything that does not add up before you order.
Applications
Typical uses reported by distributors and system integrators working with this model.
Connecting a warehouse, workshop or office block to the main site network without trenching fiber or renting a leased line.
Bringing camera clusters on remote poles, gates and perimeter points back to the control room on a single Gigabit link.
Sites with no fixed-line infrastructure and long sight lines between buildings or masts.
Connecting gatehouses, yards and outbuildings to the plant network across open ground.
Short-term links between a site office and a venue where cable cannot be laid.
Standby wireless route that takes over when the buried fiber is cut — the most common reason for a 30 km dish.
Downloads
The datasheet and the quick-start guide are sent by email on request — usually the same working day. User manuals and firmware are released after a short form, so we can keep track of which hardware revision you are running.
Full parameter table, dimensions and ordering information.
Pairing, alignment and basic configuration. English; other languages on request.
Manual and current firmware for this hardware revision, released after a short form.
Looking for something else for this model? All documents for the WB5acDish-Pro →
Request a quote
Distance, site power, and the brand you want on the housing — that is enough for us to come back with a real number.
Or email Brian@libtor.com